简婷

安科瑞电气股份有限公司 上海嘉定  201801

摘 要：交流充电桩俗称“慢充桩"，固定安装在电动汽车外、与交流电网连接，国标采用 220V单相交流电，为电动汽车车载充电机（即固定安装在电动汽车上的充电机）提供交流电源的供电装置。国家标准GB51348-2019中规定储备仓库、电动车充电等场所的末端回路应设置限流式电气防火?；て鳌５缙阑鹣蘖魇奖；て骺梢钥朔扯下菲?、空气开关和监控设备存在的短路电流大、切断短路电流时间长、短路时产生的电弧火花大，以及使用寿命短等弊端，当发生短路故障时，能以微秒级速度快速限制短路电流以实现灭弧?；ぃ佣芟灾跎俚缙鹪质鹿?，保障使用场所人员和财产的安全。

Abstract: AC charging pile, commonly known as "slow charging pile", is fixedly installed outside the electric vehicle and connected to the AC grid. The national standard adopts 220V single-phase alternating current on the power supply device that provides AC power on-board chargers for electric vehicles (that is, the chargers that fixedly installed on electric vehicles). The national standard GB51348-2019 stipulates that it should be equipped with current-limiting electrical fire protection devices in the places for reserve warehouses, electric vehicle charging and so on. Electrical fire-resistant current-limiting protectors can effectively overcome the disadvantages such as high current during short-circuit, long time to cut off short-circuit current, large arc sparks generated during short-circuit, and short service life of the traditional circuit breakers like air switches and monitoring equipments.When a short-circuit fault occurs,it can quickly limit the short-circuit current at a microsecond speed to achieve arc extinguishing protection, which can significantly reduce electrical fire accidents and ensure the safety of personnel and property on site.

关键词：电动车充电桩；交流充电桩；充电桩配电箱；慢充桩；短路保护；电气防火

Keywords: electric vehicle charging pile; AC charging pile; charging pile distribution box; slow charging pile; short-circuit protection; electrical fire protection

0 行业背景

      随着世界的发展，环境保护成为整个人类命运共同体的任务。新能源车因为没有尾气排放，不会产生一氧化碳，二氧化碳，氮氧化合物等有害物质，没有噪声污染，对环境污染较小，各国也为此提供优惠政策鼓励电动车科技的普及。

      With the development of the world, environmental protection has become the task of the human community with a shared future. Because new energy vehicles have no exhaust emissions, no harmful substances such as carbon monoxide, carbon dioxide, nitrogen oxides, no noise pollution, and less environmental pollution, governments around the world also provide preferential policies to encourage the popularization of electric vehicle technology.

      交流充电桩俗称“慢充桩"，固定安装在电动汽车外、与交流电网连接，国标采用 220V 单相交流电，为电动汽车车载充电机（即固定安装在电动汽车上的充电机）提供交流电源的供电装置。交流充电桩只提供电力输出，没有充电功能，需连接车载充电机为电动汽车充电，只起到控制电源的作用的。其采用符合国标的交流充电模式，输出功率不高于 7kW，一般车辆电池从 0 到充满需要 5-8 小时，具体情况视不同车型动力电池容量及实际充电功率而定。

      AC charging pile, commonly known as "slow charging pile", is fixedly installed outside the electric vehicle and connected to the AC grid. The national standard adopts 220V single-phase alternating current on the power supply device that provides AC power on-board chargers for electric vehicles (that is, the chargers that fixedly installed on electric vehicles). The AC charging pile only provides power output and has no charging function. It needs to be connected to the on-board charger to charge the electric vehicle, which only plays the role of controlling the power source. It adopts an AC charging mode that conforms to the national standard, and the output power is not higher than 7kW. Generally, it takes 5-8 hours for a vehicle battery to be fully charged from 0. The specific situation depends on the capacity of the power battery of different models and the actual charging power.

      对于电动车充电桩，国家标准GB51348-2019《民用建筑电气设计标准》中13.5.5规定，储备仓库、电动车充电等场所的末端回路应设置限流式电气防火?；て鳌?/span>

      For electric vehicle charging piles, the national standard GB51348-2019 《Civil Building Electrical Design Standards》13.5.5 stipulates that it should be equipped with current-limiting electrical fire protection devices in the places for reserve warehouses, electric vehicle charging and so on.

1 产品介绍

      ASCP系列电气防火限流式?；て魇前部迫鹱盼吮；さ脱古涞缦呗分卸搪?、过载等问题研发，可以克服传统断路器、空气开关和监控设备存在的短路电流大、切断短路电流时间长、短路时产生的电弧火花大，以及使用寿命短等弊端，当发生短路故障时，能以微秒级速度快速限制短路电流以实现灭弧?；?，从而能显著减少电气火灾事故，保障使用场所人员和财产的安全。

      The ASCP series of electrical fire-resistant current-limiting protectors are specially developed by Acrel to protect short-circuit and overload problems in low-voltage power distribution lines. It can effectively overcome the disadvantages such as high current during short-circuit, long time to cut off short-circuit current, large arc sparks generated during short-circuit, and short service life of the traditional circuit breakers like air switches and monitoring equipments. When a short-circuit fault occurs,it can quickly limit the short-circuit current at a microsecond speed to achieve arc extinguishing protection, which can significantly reduce electrical fire accidents and ensure the safety of personnel and property on site.

      ASCP系列电气防火限流式?；て骺晒惴河τ糜谘?、医院、商场、宾馆、娱乐场所、寺庙、文物建筑、图书馆、档案室、会展、住宅、仓库、幼儿园、老年人建筑、集体宿舍、电动车充电站及租售式商场商铺、批发市场、集贸市场、甲乙丙类危险品库房等各种用电场所末端干、支路的线路保护。

      The ASCP series of electrical fire protection current-limiting protectors can be widely used in the protection of main and branch line in various places where electricity is used,such as schools, hospitals, shopping malls, hotels, entertainment venues, temples, cultural relics, libraries, archives, exhibitions, residences, warehouses, kindergartens, elderly buildings, dormitories, Electric vehicle charging stations and leased-for-sale shopping malls, wholesale markets, bazaars, dangerous goods warehouses for Class A, B, and C, and so on.

      对于电动汽车充电站中采用集中配电箱的情况，使用ASCP500-40B系列多回路限流式?；は洹＜燃蚧税沧?，也比较美观实用。产品如下图所示。

      For the case of using a centralized distribution box in an electric vehicle charging station, it is recommended to use the ASCP500-40B series of multi-circuit current-limiting protective boxes. It not only simplifies the installation, but also can be more beautiful and practical. The product is showed below.

2 功能介绍

2.1短路保护功能。?；て魇凳奔嗖?/6个用电线路电流，当线路发生短路故障时，能在150微秒内实现快速限流?；?，并发出声光报警信号。

The function of Short-circuit protection. The protector monitors the current of 4/6 power lines in real time. When a short-circuit fault occurs, it can achieve rapid current-limiting protection within 150 microseconds and send out sound and light alarm signal.

2.2过载?；すδ?。当被?；は呗返牡缌鞴厍夜爻中奔涑魇奔洌?~60秒可设）时，?；て髌舳蘖鞅；ぃ⒎⒊錾獗ň藕?。

The function of overload protection. When the current of the protected circuit is overloaded and the duration of the overload exceeds the action time (3~60 seconds can be set), the protector will start the current-limiting protection and send out sound and light alarm signal.

2.3表内超温?；すδ?。当保护器内部器件工作温度过高时，?；て魇凳┏孪蘖鞅；?，并发出声光报警信号。

The function of over-temperature protection in the meter. When the operating temperature of the internal components of the protector is too high, the protector implements over-temperature and current-limiting protection and sends out sound and light alarm signal

2.4过欠压?；すδ堋５北；て骷觳獾较呗返缪骨费够蚬故保；て鞣⒊錾獗ň藕牛稍は壬柚檬欠衿舳蘖鞅；?。

The function of Over-voltage protection. When the protector detects undervoltage or overvoltage of the line voltage, the protector sends out sound and light alarm signal, and it can be set in advance whether to activate current-limiting protection.

2.5漏电流监测功能。当被监测的线路漏电超过报警设定值时，?；て鞣⒊錾獗ň藕?，可预先设置是否启动限流?；?。

The function of leakage current monitoring. When the monitored line leakage exceeds the alarm setting value, the protector will send out sound and light alarm signal，and it can be set in advance whether to activate current limiting protection.

2.6?；て飨允镜ピ哂?路RS485接口，可以外接无线通讯?？?，支持2G、NB-IoT和4G，可以将数据发送到后台监控系统，实现远程监控。监控后台可以是安科瑞Acrel-6000/B电气火灾监控主机，也可以是安科瑞Acrel-6000安全用电管理云平台，或三方监控软件或平台。

The protector display unit has a RS485 interface, which can be connected to a wireless communication module, supports 2G, NB-IoT and 4G, and can send data to the background monitoring system to realize remote monitoring. The monitoring background not only can be the host for electrical fire monitoring of Acrel Acrel-6000/B ,but also can be the safe cloud platform for power management of Ankerui Acrel-6000, even can be a third-party monitoring software or platform.

3 产品应用

      对于交流充电桩，一般会采用集中供电的方式，如果是户外立柱安装，充电桩分布在多个位置，位置比较分散，每个充电桩都去安装电气防火限流式?；て鳎冉下榉?，而且没有安装位置，而且防水要求较高。如果是室内挂墙安装，?；て靼沧霸谇矫嫘枰加靡欢ㄎ恢?。而采用统一集中安装的方式，方便管理和维护。

      For AC charging piles, centralized power supply is generally used. If it is installed outdoor, the charging piles are distributed in multiple locations, and the positions are relatively scattered. It’s trouble to install electrical fire-resistant current-limiting protector on every charging pile,and also,there is no installation location and the requirement of waterproof is really high.. If it is installed on the wall indoor, the protector needs a certain position.However, the unified and centralized installation way is convenient to manage and maintain.

室内停车场，充电桩采用壁挂的方式

Indoor parking lot, the charging pile is wall-mounted

户外停车场，采用立柱的方式分散安装

Outdoor parking lot, using columns to install dispersedly

      充电桩的配电箱一般在设计的时候就采用集中安装的方式，如下图所示。

      The distribution box of the charging pile is generally installed in a centralized manner during the design, as shown in the following figure.

      所以根据设计图纸，可以分批集中安装于墙面。

     Therefore, it can be installed on the wall in batches according to the design drawings.

4 结语

      新能源汽车行业持续发展，越来越多的居民小区和商业建筑都在新建或者改造电动汽车充电桩，而电气防火限流式保护器的安装又是必要元件，所以一个好的配套安装至关重要。我们应该探索更多的电气防火限流式?；て鞯陌沧坝胧褂谩?/span>

      The new energy vehicle industry continues to develop, and more and more residential communities and commercial buildings are building or renovating electric vehicle charging piles. The installation of electrical fire protection current-limiting protectors is a necessary component, so a good supporting installation is crucial important. We should explore the installation and use of more electrical fire-resistant current-limiting protectors.

国内电气火灾统计和分析

随着社会经济的飞速发展，社会电气化程度不断提高，用电负荷过大、线路短路等原因导致电气火灾发生越来越频繁，使得火灾数量呈上升趋势。

据5年的统计分析，电气火灾发生的场所中，住宅发生火灾事故的数量高居前列（占比51%），线路短路及线路老化是诱发事故的主要原因。

通过对5年电气火灾故事原因分析发现，主要有电线短路、过负荷用电、接触不良等几种原因导致事故发生。其中，电线短路占比48%。

配电线路短路特点

线路短路时，短路电流在很短时间内能达到额定电流的十几倍甚至几十倍。根据焦耳定律∶Q=I2Rt，在短路点产生的热量成指数倍增加，使短路点瞬间熔化并火星四溅，很易引发火灾事故。

传统短路?；な侄?/strong>

传统保护方式采用电磁脱扣式断路器，检测到短路时，脱扣器动作，分断时间在毫秒级，无法控制短路电流。好的方式是采用响应速度快的限流技术和器件。

ASCP10-1电气防火限流式保护器

额定电流：0~20A可设置

主要功能

短路限流：当线路发生短路故障时，能在150μs内实现快速限流保护，控制因短路电流过大所引起的电气火灾事故。

过载限流：当被?；は呗返牡缌鞒疃ǖ缌?，线路过载且过载持续时间超过设定时间（3-60秒）时，保护器进行限流?；?。

超温限流：当保护器的内部元器件温度超过设定值时，产品启动超温限流保护功能，防止因温度过高造成产品损坏。

通讯功能：一路RS485接口，Modbus-RTU协议。

ASCP200-1电气防火限流式?；て?/p>

额定电流：0~63A可设置

主要功能：

短路限流：当线路发生短路故障时，能在150μs内实现快速限流?；?，控制因短路电流过大所引起的电气火灾事故。

过载限流：当被?；は呗返牡缌鞒疃ǖ缌?，线路过载且过载持续时间超过设定时间（3-60秒）时，?；て鹘邢蘖鞅；?。

超温限流：当保护器的内部元器件温度超过设定值时，产品启动超温限流?；すδ埽乐挂蛭露裙咴斐刹匪鸹?。

过/欠压?；ぃ旱北；て骷觳獾较呗返缪骨费够蚬故?，?；て鞣⒊錾獗ň藕?，可预先设置是否启动限流?；?。

ASCP200-1电气防火限流式保护器

额定电流：0~63A可设置

主要功能：

线缆温度监测：当被监测线缆温度超过报警设定值时，保护器发出声光报警信号，可预先设置是否启动限流保护。

漏电流监测：当被监测的线路漏电超过报警设定值时，?；て鞣⒊錾獗ň藕牛稍は壬柚檬欠衿舳蘖鞅；?。

通讯功能：具有1路RS485接口，1路2G无线通讯，可以将数据发送到后台监控系统，实现远程监控。监控后台可以是     安科瑞Acrel-6000/B电气火灾监控主机，也可以是安科瑞Acrel-6000安全云平台，或三方监控软件或平台。

技术参数：

ASCP系列电气防火限流式?；て鳌沧坝虢酉?/strong>

尺寸与安装：

接线方式：

作者简介：简婷，女，本科，现就职于安科瑞电气股份有限公司，主要研究方向为建筑能耗监测系统。

电气防火限流式?；て骺捎行Э朔扯下菲?、空气开关和监控设备存在的短路电流大、切断短路电流时间长、短路时产生的电弧火花大，以及使用寿命短等弊端，发生短路故障时，能以微秒级速度快速限制短路电流以实现灭弧?；?，从而能显著减少电气火灾事故，保障使用场所人员和财产的安全。

ASCP200-1 型电气防火限流式?；て魇堑ハ嘞蘖魇奖；て?，大额定电流为 63A?？晒惴河τ糜谘?、医院、商场、宾馆、娱乐场所、寺庙、文物建筑、会展、住宅、仓库、幼儿园、老年人建筑、集体宿舍、电动车充电站及租赁式商场商铺、批发市场、集贸市场、甲乙丙类危险品库房等各种用电场所末端干、支路的线路?；ぁ?/p>